How to Recover Data from NVMe SSD in 5 Steps

SSDs initially had the same form factor (2.5-inch HDD) and interface (SATA) as traditional hard drives, but now there are smaller form factor M.2 SSDs with different interfaces: SATA 3.0, USB 3.0, and the fastest interface, NVMe, based on the PCI Express bus.The PCIe 4.0 transfer speed can reach up to 64,000 MB/s. However, they aren't immune to data loss.

Fear not, it’s possible to recover data from NVMe SSD sometimes and there are 3 practical methods, but the success rate varies. You need to know the possible factors in depth and get the How-to guide below..

Can I Recover Data from NVMe SSD?

Usually, the answer is often yes, but several factors can influence the success of the recovery process. Let's break them down:

How to Recover Data from NVMe SSD

Here’s a step-by-step instruction about how to recover data from NVMe SSD. You need to be sure the TRIM feature is disabled and download MyRecover, a powerful data recovery software, in Windows 7, 8, 10, and 11.

Step 1. Disable the TRIM feature

Connect the NVMe SSD externally to another working PC through the enclosure.

Then, type cmd in the search box and select Run as administrator. You need to type the following command and press Enter to execute.

fsutil behavior set DisableDeleteNotify 1

Step 2. FREE Download Data Recovery Software

MyRecover integrates Quick Scan & Deep Scan technologies to help you recover data from NVMe SSD with high success rate and fast speed, even recovering data from dead M.2 SSD. 

Be sure the machine connected to the NVMe SSD is turned on.

Then, navigate to the official website and click Try for Free to download and install MyRecover. Or click the download button below.

Step 3. Scan the NVMe SSD

Open MyRecover. In the PC Recovery section, you will see a list of available drives. Select the NVMe SSD and click Scan. It will automatically run "Quick Scan" for a faster scan of recently deleted files and "Deep Scan" for a more thorough search.

Step 4. Filter and Preview Data

The sidebar directories on the left, and the filter feature and search box in the top right allow you to narrow down the results, especially useful to recover specific files or folders.

Expand the sidebar directories to find deleted or lost files in their original location (if you remember). Or specify the data type, such as Documents, and type the file name or extension in the search box to locate deleted or lost files quickly and accurately.

Step 5. Start NVMe SSD Data Recovery

Once found, double-click the files to get a full-screen preview and check if it’s corrupted. You can select files by ticking the checkboxes or leaving them blank.

Then, click the Recover x files button to start NVMe SSD data recovery.

You will be asked to select a location to save the recovered data.

Select a new one rather than NVMe SSD to prevent data from being overwritten. It can be the current system's disk, external disks, USB drives, etc.

It is not limited to recovering data from NVMe SSD. You still can use it to recover deleted files from hard drive, SATA SSD, M.2 SSD, USB drive memory card, etc., in the following scenarios:

• Recover files from formatted hard drive
• Recover files deleted by birus
• Recover files from lost partition
• Recover deleted files from Recycle Bin
• Recover permanently deleted files
• ......

Other Ways to Recover Data from NVMe SSD

Also, you can choose to perform NVMe SSD data recovery in the following 2 methods.

#1: Restore Files from Backup

In Windows 8 and later, Microsoft allows you to save copies of files in the Libraries, Desktop, Contacts, and Favorites every hour and keep saved versions forever by default. You can even backup specific folder in Windows 10 or 11 by clicking Add a Folder in the Backup options window. Try to recover data from NVMe SSD if there is any available backup.

Step 1. Go to Control Panel > System and Security > File History.

Step 2. Select Restore personal files on the left side.

Step 3. It will display the latest backup and files in it. Check if there are any important data on NVMe SSD and click the green restore button to recover data to a new location.

Step 4. If not, click the left arrow to check the previous backups and locate the desired data to recover.

#2: Restore Files from Previous Version

You can also use the Restore Previous Version feature to recover data from NVMe SSD, especially in folders. Please be sure the File History or System Restore is enabled.

Step 1. Select the folder containing deleted files, right-click it, and select Properties.

Step 2. In the Previous Versions tab, check if there is a previous version. You can also click the Open button to confirm its contents.

Step 3. Then, select the previous folder version and click Restore. If there are any new data, you need to save data to a safe location. 

Now you must be aware of the importance of data backup, which gives you a chance to restore files in any scenario. So it’s necessary to backup files to external hard drive or other devices to save copies of them.

Conclusion

Recovering data from NVMe SSD is always nerve-wracking, but with powerful data recovery software like MyRecover, you can get data back easily and quickly, even without backups. It integrates two scanning technologies to search deleted or lost data effectively, and some useful features simplify this process.

Please download it to have a try.