Solve: The Boot Configuration Data for Your PC Is Missing

When you receive the error message "The Boot Configuration Data for Your PC is missing," it means that your computer's boot information has been corrupted. This can happen for several reasons, including:

• Virus attacks
• Power surges
• Hardware boot failures
• Missing or corrupt boot configuration data
• Corrupted master boot record (MBR)

How to Fix Boot Configuration Data Missing in Windows

There are several ways to solve the "Boot Configuration Data for your PC is missing" error. Here are four of the best methods, explained step by step to help you resolve the issue effectively.

1. Rebuild BCD with Command Prompt

To fix corrupted BCD in Windows 10, you can rebuild it using the Command Prompt:

Step 1: Insert the installation media or recovery drive and boot your computer from it (you may need to change the boot order in BIOS). Select the language and other preferences, then click "Next."

Step 2: Click "Repair your computer" at the bottom left of the Windows Setup screen.

Step 3: Select "Troubleshoot," then choose "Advanced options."

Step 4: Click "Command Prompt" and type the following commands, pressing Enter after each:

Bootrec /fixmbr

Bootrec /fixboot

Bootrec /scanos

Bootrec /rebuildbcd

Step 5: When prompted, type A to add the installation to the boot list, then press Enter.

Step 6: Exit the Command Prompt and click "Continue" to boot into Windows 10.

2. Run Windows Startup Repair

Running Windows Startup Repair can fix the "Boot Configuration Data for your PC is missing" error by repairing corrupted Windows files. This method not only resolves the current issue but also helps prevent future errors. Follow these steps to run Windows Startup Repair:

Step 1: Insert a recovery drive and boot your computer from it.

Step 2: Select your language and other preferences, then click "Next."

Step 3: Click "Repair your computer" at the bottom left of the Windows Setup screen.

Step 4: Select "Troubleshoot," then choose "Advanced options."

Step 5: Click "Startup Repair" and wait for the process to complete.

Step 6: Restart your computer to see if the error persists.

3. Rebuild BCD Store with Bcdedit.exe

Rebuilding the BCD store using Bcdedit.exe can resolve the "Boot Configuration Data for your PC is missing" error. Follow these steps to rebuild the BCD store:

Step 1: Insert the Windows bootable drive and boot from it.

Step 2: Select your language preferences and click "Next."

Step 3: To open the Command Prompt, press Shift + F10.

Step 4: Type the following commands, pressing Enter after each:

bootrec.exe /Rebuildbcd

bootrec.exe /Fixmbr

bootrec.exe /Fixboot

Step 5: If the above commands do not work, try these commands:

bcdedit /export C.\BCD_Backup

cd boot

attrib bcd -s -h -r

ren c.\boot\bcd bcd.old

bootrec /RebuildBcd

Step 6: Once all commands are executed successfully, type exit and press Enter to close the Command Prompt. Restart your system to check if the issue is resolved.

4. Set Windows Partition Active

If the "Boot Configuration Data for your PC is missing" error is due to the Windows partition being inactive, you can activate the partition where Windows is installed. Follow these steps to activate the partition:

Step 1: Open the Command Prompt. Go to the Start menu, type "Command Prompt," and press Enter.

Step 2: Type the command list disk and press Enter. This will display all the disks on your system.

Step 3: Type select disk X (replace X with the disk number where Windows is installed) and press Enter.

Step 4: Type list partition and press Enter. This will list all partitions on the selected disk.

Step 5: Type select partition Y (replace Y with the partition number where Windows is installed) and press Enter.

Step 6: Type active and press Enter. This will activate the selected partition.

Step 7: Close the Command Prompt and restart your computer to see if the issue is resolved.

Recover Data from BCD Missing Windows [Free]

If none of the previous methods work, you can use free data recovery software like MyRecover to recover lost or deleted files due to the "Boot Configuration Data file is missing" error. This tool supports various file types, including photos, videos, and documents.

Key Features of MyRecover

• User-Friendly: Even beginners can use it easily.
• Safety: Ensures 100% data safety without losing or corrupting data.
• Wide File Type Support: Recovers various file types such as recovering deleted photos, videos, documents, etc.
• Original Data Recovery: Recovers original data without overwriting files.

MyRecover provides a straightforward and reliable solution to recover lost data due to the "BCD missing Windows 10" error. Download and use it to retrieve your files effectively.

To initiate the file recovery process using MyRecover, follow these simple steps:

Step-by-Step Guide to Using MyRecover

1. Run MyRecover:

Install and launch MyRecover on your PC.

2. Initiate Scan:

Hover over the hard drive containing the target folder and click on "Scan" to commence scanning.

3. Filter and Preview:

During scanning, utilize the Quick Scan & Deep Scan functionalities to identify deleted or lost files.

Use filters such as file type, date modified, and size to streamline the search process.

4. Select and Recover:

Choose the desired data for recovery and click on "Recover X Files."

This straightforward process ensures that you can efficiently recover deleted files from PC using MyRecover.

Conclusion

The "Boot configuration data file is missing" error can be resolved in several ways. We outlined four straightforward fixes to help you address this issue. Additionally, if you need to recover your data, using a reliable data recovery tool like MyRecover can be an effective solution. MyRecover allows you to recover all types of data seamlessly. Download it today to explore its features and ensure your data is safe and retrievable!